ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
48
Body Set with Masking for YZ-870C
YOK-YZ-101
CHF49.60
Auf Lager  
+ −
YZ-2 Aluminum bell Crank (L/R)
YOK-Z2-201BA3A
entspricht: Z2-201BA3
CHF32.90
Auf Lager  
+ −
Competition Capacitor (Non-Polarity)
YOK-BL-RCPA
entspricht: BL-RCP
CHF49.60
Auf Lager  
+ −
Brass Rear H Arm Weight Base (20g)
YOK-Y2-008RW20
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF47.90
Auf Lager  
+ −
LMR 27 Rear Wing
YOK-Z2-CAL2WA
entspricht: Z2-CAL2W
CHF14.90
Auf Lager  
+ −
Alu Rear upper Arm mount YZ-2
YOK-Z2-300RUW
 
CHF46.90
Auf Lager  
+ −
Rear short ”X30” shock set for YZ-2DTM3/CAL3
YOK-S4-S1MA
A shock set that can be used for the rear of YZ-2DTM3/CAL3 and the front of YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and increase the shock absorption effect.
CHF69.90
Auf Lager  
+ −
Rear Wheel
YOK-B4-827A
entspricht: B4-827
CHF6.40
Auf Lager  
+ −
Yokomo Pit Bag IV
YOK-YT-24BK4
Hand-held pit bag convenient for storing machines and peripheral equipment, with a large capacity to hold a 1/10-size drift car with the body attached, and a two-tiered inner box. Outer dimensions: about 26 x 31 x 52 cm Inner box dimensions: about 246 x 146 x 482 mm
CHF69.90
Auf Lager  
+ −
YD-2/BD8 Brass Sus holder B (43.5~46.7mm)
YOK-TS-2150
Please be announced the new items made by brass for BD-8 and YD-2 series.
CHF27.90
Auf Lager  
+ −
Aluminum Separate Suspension Mount (43.5mm)
YOK-B7-3135BS
 
CHF19.90
Auf Lager  
+ −
Alu Motor mount inkl. Fan YD-2
YOK-Y2-304SFA
entspricht: Y2-304SF
CHF49.90
Auf Lager  
+ −
Gear Diff 40T Ring Gear (for S4-503D16) YZ4-SF
YOK-S4-503R16A
entspricht: S4-503R16
CHF34.50
Auf Lager  
+ −
Aluminum Rear Hub Carrier L/R for SO Series
YOK-SO-415RA
CHF45.90
Auf Lager  
+ −
Titanium Turn Buckle Set (9pcs)
YOK-B7-TBSA
CHF45.90
Auf Lager  
+ −
HVF Shock shaft (19.1mm/Heavy fluorine coat) BD9
YOK-B9-S5SHVFA
entspricht: B9-S5SHVF
CHF27.50
Auf Lager  
+ −
L5 Rear Suspension Arm YZ-4
YOK-Z4-008RL5
CHF9.65
Auf Lager  
+ −
Graphite Steering Block BD9/BD10
YOK-B9-415SGA
entspricht: B9-415SG
CHF14.50
Auf Lager  
+ −
Slide Rack Set (Center Clank) for RD2.0
YOK-RD-202SC
This slide rack set can be bolted on to the RD2.0.The servo can be mounted closer to the rear via the center crank, increasing the rear load and stability.
CHF134.90
Auf Lager  
+ −
Metal gear diff kit (High capacity) for YZ-2 serie
YOK-Z2-500MG3A
High capacity
CHF43.90
Auf Lager  
+ −
Aluminum Rear Hub Carrier RTC BD11
YOK-B11-RTC-3
Aluminum rear hub carrier that can be used for BD10/11. It is a hub carrier for the RTC (rear toe control system) that is standard on the BD11, and by setting the angle of the kingpin to 4 degrees, which is an increase from the standard reverse caster 2 degrees, it is possible to control...
CHF43.90
Auf Lager  
+ −
Gear differential set for BD10
YOK-B10-500GSA
A gear differential set used for the rear differential of BD10. # 7500 differential oil is included with the gear differential assembly.
CHF52.90
Auf Lager  
+ −
Alu Front Bumper Brace YD2/YD4
YOK-Y2-001BA
 
CHF32.90
Auf Lager  
+ −
Racing Performer M3 Motor 4.5T
YOK-RPM-TC45
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Adjustable Suspension Mount Set
YOK-Y2-301ACA
entspricht: Y2-301AC
CHF89.90
Auf Lager  
+ −
Racing Performer M3 Motor 5.5T
YOK-RPM-4W55
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Racing Performer M3 Motor 13.5T
YOK-RPM-J135
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Racing Performer HYPER cooling fan (30mm size comp
YOK-RP-033A
entspricht: RP-033
CHF22.90
Auf Lager  
+ −
Racing Performer M3 Motor 13.5T
YOK-RPM-4W135
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Titanium Screw Set for SO2.0
YOK-RP-115
This set allows the 104 screws used in the Super Off-Road SO2.0 to be made of titanium. All titanium screws are manufactured by high-precision cutting, so they are well finished when the machine is assembled, allowing for a solid machine build.
CHF129.90
Auf Lager  
+ −
Karosseriehalter magnetisch hinten
YOK-Y2-016MGRA
Magnet type rear body mount. Attach the aluminum mount post to the rear from the rear shock tower and attach the steel adapter. Even if the body is lifted, it can be firmly fixed so that it will not come off the chassis, and it is safe even if it vibrates or crashes while driving.
CHF28.90
Auf Lager  
+ −
Front double joint univ. shaft (with Bearing) YZ-4
YOK-Z4-010FW
 
CHF64.90
Auf Lager  
+ −
Fahrzeug Tasche Team Yokomo
YOK-YT-28MB
A new hand-carry bag with the Yokomo logo is now available for transporting your machine to the race track. The bag is large enough to hold not only touring cars and drift cars, but also wide off-road cars. The bag is also equipped with a belt to easily hold the machine for safe...
CHF64.90
Auf Lager  
+ −
"X33" shock X ring
YOK-Z2-S3XA
entspricht: Z2-S3X
CHF6.50
Auf Lager  
+ −
Alu rear hub carrier (Toe-in 1.0°) for B-MAX4III
YOK-B4-415R10
 
CHF42.90
Auf Lager  
+ −
Graphite Molded Front Bulkhead for RO/SO
YOK-Z2-002BG
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF12.80
Auf Lager  
+ −
YD-2 Aluminum UL Front Axle (adjustable range 5mm~
YOK-Y2-010FHA
YD-2 Aluminum UL Front Axle (adjustable range 5mm~9mm)
CHF25.90
Auf Lager  
+ −
Steering bell crank (with bearing) for BD8-2018
YOK-B8-202SS
CHF63.90
Auf Lager  
+ −
Graphite molded L5/LD rear sus-Arm YZ-4SF2/YZ-2
YOK-S4-008R5GA
For YZ-4SF2/YZ-2CAL DTM3 and 3.1
CHF15.90
Auf Lager  
+ −
Yokomo Muffler Cutter
YOK-SD-ACMC2A
entspricht: SD-ACMC2
CHF8.90
Auf Lager  
+ −
Steering Limiter Screw 8/8.5/9 stck je
YOK-B7-201LS
CHF21.00
Auf Lager  
+ −
Alu Transmission Case (edge trimmed) upper YD-4
YOK-Y4-302UC
 
CHF62.90
Auf Lager  
+ −
“X30” 13 shock set (rear)
YOK-S4-S1L13
This is a F13mm big bore shock set. The L size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
Auf Lager  
+ −
M4 Serrated Flange Nut 11mm dünn 4stk.
YOK-ZC-N4FLTA
entspricht: ZC-N4FLT
CHF8.90
Auf Lager  
+ −
Full counter solid axle set (Rear×1.5/Blue)
YOK-IB-FCD15
 
CHF41.90
Auf Lager  
+ −
Bell Crank (8x5 bearing assembled)
YOK-B7-202SBA
 
CHF41.90
Auf Lager  
+ −
Graphite Battery Holder set for BD10
YOK-B10-118GA
entspricht: B10-118G
CHF47.90
Auf Lager  
+ −
Alu Chassis für BDFWD/BD10F
YOK-BD-002FA
CHF124.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF999
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)